Ferroli Titano Win double tank wifi electric water heater

Technical characteristics

TITANO TWIN 30

• Capacity: 30 l
• Temperature range: 40 - 80º C
• Maximum working pressure: 8 bar
• Electric voltage: 230 V - 50 Hz
• Electric power: 1800 W< /li>
• Recovery time at 40 ºC (cold water: 15 ºC): 35'
• Electrical protection: IPX4
• Installation: Vertical / horizontal multiposition
< li>Full weight: 47.7 kg
• Dimensions (height x width x depth): 67.9x46.2x27.4 cm

TITANO TWIN 50

• Capacity: 50 l
• Temperature range: 40 - 80º C
• Maximum working pressure: 8 bar
• Electric voltage: 230 V - 50 Hz
• Electrical power: 1800 W
• Recovery time at 40 ºC (cold water: 15 ºC): 59'
• Electrical protection: IPX4
• Installation: Vertical / horizontal multiposition
• Filled weight: 75.1 kg
• Dimensions (height x width x depth): 97.1x46.2x27.4 cm

TITANO TWIN 80

• Coat capacity: 80 l
• Temperature range: 40 - 80º C
• Maximum working pressure: 8 bar
• Electric voltage: 230 V - 50 Hz
• Electric power: 1800 W
• Recovery time at 40 ºC (cold water: 15 ºC): 1h 37'
• Electrical protection: IPX4
• Installation: Vertical / horizontal multiposition
• Filled weight: 111.5 kg
• Dimensions (height x width x depth): 107.7x54.2x31.4 cm
< /ul>

TITANO TWIN 100

• Capacity: 90 l
• Temperature range: 40 - 80º C
< li>Maximum working pressure: 8 bar
• Electric voltage: 230 V - 50 Hz
• Electrical power: 1800 W
• Recovery time at 40 ºC (water cold: 15 ºC): 3h 01'
• Electrical protection: IPX4
• Installation: Vertical / horizontal multiposition
• Filled weight: 124.5 kg
• Dimensions (height x width x depth): 119.4x54.2x31.4 cm

Steps when installing a thermos:

1. Mark the exact position of the flask with a pencil or marker

The places where you want to place your electric water heater must be precisely marked. Mark the fixing points with a pencil. Once this is done you can proceed safely to make the holes in the wall to place the new thermos.

2. Choose a suitable drill

The drill that you must use here has to be the diameter of the plugs. And once the holes are made, all that remains is to fit the plugs. If you need it, you can help yourself with a hammer to introduce them.

3. Seal the hot water intake pipe

We insert the screws into the plugs and tighten them well so that they are well fixed. Then we seal the hot water intake tube to prevent leaks. You can use a reducing fitting to fit the valve to the wall pipe, since they do not have the same diameter.

4. Seal the threads with the sealing thread

After placing the thermos to the hot water intake and fixing it correctly, we will use the sealing thread. It is not mandatory, but it is another of our Brycus tips to prevent water loss. All threads should be sealed.

5. Put the brass bushings

Now it's time to screw both hoses. On this occasion, a weld is made using a filler metal, so we will use brass bushings. Once the task is finished, it is recommended to sand the joint area. Furthermore, a stripper can be used to prevent rust.

6. Place the sleeves

This structure must be fixed to the cold water intake, again through a good welding. An electrolytic sleeve is then placed on this socket to prevent corrosion.

7. Join hose and valve

To join the sleeve with the valve we will use a male-male bushing. And we will place another sleeve in the other entrance, the hot water one. Check that they are well joined before moving on to the next step.

8. Now it's the turn of the hoses

Essential for the operation of the thermos. They must be perfectly connected to the joints. And we already took the opportunity to place a tube to be able to empty the thermos easily. Its place is at the outlet of the safety valve.

9. paint the tubes

And it can now be painted to improve its aesthetics! If you want it to go unnoticed, it is best to paint the tubes the same color as the walls of your house. It will go completely unnoticed.

10. Check that it works correctly

Now it only remains to check if it works correctly! Turn on the thermos and enjoy hot and cold water. Good job!