Brand: Bestway
Reference: 58486G
Choosing a Bestway 11,355 l/h sand treatment plant compared to a cartridge one has several advantages: Although it may involve a higher initial outlay, it is economically more affordable in the long term, since it requires less operating time to filter the same volume of water. This is because it usually has more power. It has a greater filtering power than cartridge filters, since it is capable of filtering smaller particles. Thanks to its greater power, it has the possibility of incorporating a more effective pool cleaner. The sand can last up to several seasons without needing to be changed in the case of the largest sand treatment plants, while the filters of the cartridge treatment plants have to be changed every 2-3 weeks. This model of treatment plant pumps 11,355 liters per hour with a power of 500 W. It incorporates a pre-filter with a threaded lid to protect the pump from the thickest impurities. In addition, its tank is very resistant, since its filter has an anti-corrosion treatment. The clamp clamp design allows for 360 degree rotation, making it quite easy to manipulate. Includes ChemConnect ™ and easy-to-read pressure gauge and timer. This treatment plant uses silica sand with a size of 0.45-0.85, which is not included. This Bestway 11,355 l/h sand treatment plant has a manufacturer's guarantee, Bestway.
Pump water flow (pump capacity): 9,800 l/h (3,000 gal./h)
Integrated pool system water flow (system flow): 8,327 l/h (2,200 gal./hr)
Durable, corrosion resistant filter bowl.
6-position valve allows for easy filter control.
The built-in timer allows you to set a period of automatic operation.
Top flange clamp design allows for 360° swivel for fast, jam-free installation.
Easy to read pressure gauge.
The included ChemConnect dispenser keeps pool water clean and hygienic. Dispenser release provides a stable level of chlorine necessary for proper chemical balance.
The pre-filtering sieve basket is an additional mechanism that retains the largest debris, such as leaves, hair and dirt. Protects your pump's impeller and increases its life by making it always run smoothly.
This product is pre-assembled for convenience.
Compatible with 3.2 cm /1.25'' tubes using the supplied adapters.
Can be connected to 3.8 cm /1.5'' threaded valves.
This product works with regular sand or our high efficiency Polysphere product.
Compatible with most above ground pools.
Sand is not included.
Required size of sand: silica sand nº20, 0.450.85 mm, approximately 36 kg.