Mara Resin Booth 1.34 m2

Characteristics Technical:

• Ext. Measurement:  130 x 102  x 203 cm.

• Int. Measurement:  120 x 92 cm.

• Weight: 39 Kg.

• Material: Resin

• Thickness: Door Measurements: 75 x 173 cm.

• Type of Door: Hinged

• Type of Joint: Screws and brackets

• Colour: Anthracite / White
< /ul>
• Roof: Gable
• Floor: Not included    
• Window: Yes included

Every resin garden shed needs a Periodic revision to guarantee its duration over time:

• It is important not to forget about the maintenance of your garden shed; Sometimes one tends to focus more on indoor items than outdoor items, but after all outdoor items are more prone to dirt and damage as they are exposed to the elements. Therefore, it is very important to check the shed from time to time to see what kind of maintenance needs to be done.
• Cleaning the exterior panels: An exterior shed requires regular cleaning. Therefore, it is important to clean it of dust and other residues such as leaves and mud, using a mixture of soap and water. Apply it to a piece of cloth and wipe down the sides of the shed. If your shed is quite large, you may find it easier to spray the exterior walls with water using a hose. You may need to use a plastic bristle scouring pad to scrub off stubborn dirt that may be stuck to parts of the shed.
• The roof of a resin shed it is prone to accumulating more dirt. To clean it most effectively, you should first sweep up all the dirt and dust with a broom  or a hand brush. Then use a water hose directly on the roof. Next, spray a little liquid soap on the roof and scrub with a plastic bristle scourer, if necessary you can use a ladder. Finally, rinse again with plenty of water and dry with a squeegee or cloth.
• An outdoor resin shed is the place where you will store various articles. It is important that you do not store items carelessly and leave them there unattended. Be sure to clean the inside of the shed, at the very least, by regularly sweeping the floor and dusting the shelves. There may be some spills and stains that need to be removed. In that case, it is best to apply a little synthetic turpentine oil or any type of mineral spirit.
• protective spray: Use a protective spray to protect and care for the plastic resin . You may want to give it a try as it will apply a protective layer while adding shine and luster to the plastic. There is not much that can be done with a plastic shed, as opposed to wood or metal. Plastic is weather resistant, but over time it can start to look a bit tatty if you don't clean it and help it look a bit more polished.




*It is recommended to have a flat, level surface with a thickness of approximately 10 cm 

You can visit Marcas Area:  Gardiun