Emuca Guides for extendable and lifting table Oplà Top, Anodized stainless steel, Aluminum

Description

Oplà Top, hidden auxiliary table system with rapid extraction and elevation. The use of this system is oriented to the kitchen, with a simple gesture the table is placed at the same level as the top of the worktop, thus achieving an expansion of the surface we are working on.The Oplà Top can be installed in modules of width of 900 mm and a minimum depth of 540 mm, this being the space used by a drawer. The front of the cabinet behind which the system is stored must have hinges to open it and allow it to be removed. The guides of the system allow the extraction of a surface of 500 mm and a load capacity of 40 kg.The guides are connected by a profile that gives greater stability to the set, if we want to mount the system in a module with a width of less than 900 mm , we will cut this stabilizer profile to fit the required width. In addition, the mechanism has springs that facilitate the lifting movement of the mechanism. The boards that make up the support surface or the front are not included.