Emuca Drawer kit for kitchen or bathroom Vertex height 93 mm with included tops.

Description

Kit for kitchen and bathroom drawer with all the necessary elements for assembly. It is the optimal solution for your kitchen, bathroom or closet furniture with an elegant anthracite gray and white design. Each kit consists of all the elements necessary for the assembly of an exterior drawer with a height of 93 mm and a depth of 500 mm with various module widths. Includes: two side ribs, a set of soft-close runners, a set of trim covers, back and bottom boards and the fasteners for the front of the drawer. You will simply need the front panel with the necessary dimensions of the drawer.The metallic side ribs are made of steel with anthracite gray and white painted finish, they allow the front of the drawer to be adjusted ± 2mm vertically and ± 1mm horizontally. The guides are of total extraction with soft closing and allow a maximum load of 40 Kg for the drawer.The boards included for the bottom and the back are made of particle board in anthracite gray and white and with a rough surface to give greater resistance superficial. The boards are 16 mm thick and are cut to size from standard modules (450 mm, 600 mm and 900 mm). However, they can be cut to fit the required module width.