Bright White Tile Paint 750 ml Bricotex

Technical characteristics:

• Drying to the touch: from 30 to 60 minutes.
• Repainting: after at least 6 hours.
• Drying time for shower tiles: At least 4 days.
• Coverage: 12 to 14 square meters per litre of paint. (The actual coverage of the paint will depend on the thickness of the film, the nature of the surface to be painted and the method of application)
• Thinner and cleaning: water.
• Glossy finish. No yellowing over time
• It can be mixed with Universal Dye or Water Dye.
• Stir (do not shake) the contents of the container well, until it is completely homogenized.
• It may be applied with a brush, roller or spray.
• Surfaces that must be clean, dry, dust-free and properly prepared.

Painting over previously painted surfaces:

• If the surface is in good condition, wash, sand and apply Glossy White Tile Paint directly. Otherwise, remove the old paint completly and proceed as if it were an unpainted surface.

If painting over previously unpainted surfaces:

• On wood, previously apply a layer of Multipurpose water-based or Water-based Sealant.
• On metal, apply a layer of Multipurpose or water-based antioxidant primer.
  

Precautions:

• Never apply this product at temperatures below 5ºC. or at temperatures above 35ºC. to avoid cracking.
• Never apply in direct sunlight or when there is a risk of frost or rain.