Two original ideas for setting up your own wooden magazine rack

Having reading material available in the room will give you the possibility to sit down and relax during your free time. On the other hand, if you have a barbershop, office or any other business where customers have to sit waiting to be served, giving them options to read will help the time pass more quickly.

However, stacking a pile of books and magazines on a table does not look very aesthetic. It's better to put them in a magazine rack. This piece of furniture not only makes it easier to arrange literature, it is also an excellent decorative element. The best thing is that you can do it yourself, and without much expense or effort.

Brycus advice tells you what steps to follow to make two different models of wooden magazine racks. Discover everything you need in our website.

How to make a rectangular magazine rack

The structure of our first design consists of a rectangular frame and four crossbeams where the publications will be placed. Let's see how to make a magazine rack like this one.

From a strip of wood, of those used to make frames, you must obtain two pairs of pieces. One pair will measure 100 centimeters and the other will measure 35 centimeters. You will also have to cut a circular wooden strip into four equal parts, making sure that they are long enough to go through the frame from side to side.

The next step is to use a ruler to draw a vertical line through the center of the longest pair of pieces. Then, you need to place them side by side and make marks that are the same height on both strips and that are equidistant from each other. Using a drill bit whose diameter is a little larger than the circular strips, make holes in these marks.

Then apply white glue to the ends of the short pieces, glue them perpendicularly to the ends of the longer strips, and secure the joints with screws. The result will be a rectangular wooden frame.

Finally, sand the structure to eliminate any roughness on its surface, and paint the magazine rack to your liking, taking care that the colours chosen match the space where you will be placing it. Since this is a type of furniture that you will probably use a lot, we recommend you to choose a quality varnish. When it has dried completely, place the crossbars. Your magazine rack will be ready for use.

How to design a magazine rack

A simpler, but not unoriginal, alternative is to make a magazine rack that consists of two pieces of wood that cross diagonally with each other. What are the steps to follow to produce such a design? Brycus gives you the details below.

The manufacturing process begins with the selection of the pieces. They should be wooden boards that are the same dimensions, preferably twice as long as they are wide. For example, if a board is 35 centimeters wide, it should be 70 centimeters long.

Subsequently, a groove should be made in each of the wooden rectangles. In order to know exactly where to cut the pieces, draw a guide in the middle of the longest part. This should be half the length of the width of the board and slightly wider than its thickness. Make the grooves with the help of a jigsaw.

Finally, it is time to sand the wood boards and paint them to your liking. You can now assemble your magazine rack by joining the two pieces together through the cracks.

There you go. No doubt, these two easy-to-manufacture magazine rack ideas will make your space look neater and more sophisticated. Discover everything you need on our website to carry out your own projects.