Decorating Halloween with simple dishes

To make this fun craft, the skulls of which have become essentials on Halloween, you will need:

• Disposable plates

• White and black cardboard

• White paper

• Scissors

Step by step instructions

1. Take the plastic plate and make a more or less straight cut at the bottom. To give you an idea, cut out a quarter of the plate.

2. With a glue stick, glue small pieces of white paper to the surface as a collage.

3. On a black cardboard cut out large circles and a small heart and stick them on the surface of the plate. The circles will make the eyes and the inverted heart the nose.

4. With the white cardboard cut out some white rectangles that will make teeth and glue them behind the plate, just at the bottom.

This is one of our easiest chilling tips to make, although the result will convince you to decorate your living room. Ideally, hang these spiders throughout the room and make their legs and eyes move nonstop.

Take a look at the Brycus offers section and get everything you need to make this craft:

• Disposable plates

• Multi-colored paint

• Moving eyes of different sizes

• Thread

• Pipe cleaners

• Scissors and glue

Step by step instructions

1. The first thing you have to do is color the back of the paper plates, each one in the color you want.

2. Once it has dried, you will stick 4 pipe cleaners on both sides as if they were the legs.

3. Stick the moving eyes of different sizes all over the surface of the plate, wherever you want.

4. Finally you have to make a simple hole at the top and pass a thread so that you can hang it in any corner.

Your house will be ideal if you make several spiders of different colors and with different sizes of dishes.

If you are going to throw a party and there are friends with young children, nothing better than making little witch hats to have a great time. To create them you will need the help of your little ones and these simple materials:

• Plastic plates

• Party hats

• Black and gray paint

• Stickers with bat or pumpkin shapes

Step by step instructions

1. First you will need to take apart the party hats to turn them over. That way it will be easier for you to paint them in black. Another way to do it would be to make a simple cone with a piece of cardboard and put an elastic cord on both sides.

2. Place the cone or hat in the center of the plate and draw a line around it. Make another slightly smaller circle around the original. Do not worry too much, remember that it is a simple craft.

3. The next thing is to make a hole in the center of the plate so you can put the scissors inside and cut out the smallest circle.

4. Cut slits around the bottom of the hat, but try not to cut beyond the elastic cord.

5. Remove all these lapels and place the hat in the hole in the plate. If you see that it is necessary, you can cut the circle a little larger so that it fits. Be that as it may, do not forget that the elastic cord of the hat must hang down.

6. Glue on the plate all the flaps or fins that you previously cut on the cone.

The witch hat is already made, although now you will have to use your imagination to paint it in a dark color. It will do well with black paint and a little gray paint to give it an older color.

Once dry, add the stickers or whatever you want, be it feathers, bulging eyes, glue , etc.