How to smooth a Gotelé wall

The gotelé is a decoration technique that was used a long time ago. Its success was due to the fact that it is really useful when it comes to covering the damages of the walls. Today see homes with gotelé gives us the feeling of being in an old space and nothing current. Therefore, it is normal that many people are interested in removing this decoration from their home. Basically there are two ways to get it:

Covering the gotelé

It is made using gotelé cover paste and is used when the walls have plastic paint, since it is hard and difficult to scrape. In addition, it is the cleanest and fastest method to say goodbye to the gotelé. In Brycus tips we explain the steps to follow:

   Calculate the necessary pasta

You have to measure the walls you are going to cover to calculate the total m2. To do this, subtract the surface of windows and doors. Generally, 1 kg of pasta is needed for each m2. This way you will know how much product you need to buy. The paste has a thickness of about 3 mm. If you gotelé is deeper, you must perform the calculation to give two layers.

   Protect the house

It is the way that everything is cleaner once you have finished. Simply put the furniture in the center and cover them with plastic. Also, put bodybuilder's tape on the edges of switches, windows, doors and skirting boards, as well as the connection of the wall with the ceiling.

   Apply the product

Remove the product before you start. The mass is quite thick, so you may need a drill with stirring rod. Then apply it on the walls with the help of a roller. Perform horizontal, vertical and diagonal movements. It is advisable to make 2 x 2 m areas so that the paste does not dry out and there are not too many joints.

   Eliminate and sand imperfections

Pass the trowel on the wall horizontally so that there are no binding edges. Do it when the pasta is still wet. When dry, sand the remaining imperfections and remove the resulting dust with the help of a clean cloth.

   Seal and paint the wall

Use a primer to seal the wall correctly and then paint it the color you want. If you prefer, you can also choose a wallpaper. There is a wide range of designs available in the market among which you can choose.

Scraping the gotelé

This option is used when the paint on the wall is tempered, so it is not too hard to scrape. One of our Brycus tips is that before you start you make sure that the wall does not have serious imperfections, because they will be exposed when you finish.

    Moisten the wall

Wet the gotelé with a water spray. We recommend you apply it in areas of 1 x 1 m. Just moisten the temper until it changes color. Avoid getting wet to form a paste.

    Scrape the paint

Once it is moist enough, scrape the wall with a spatula about 5 cm wide. To do this, you should tilt it slightly and apply a firm upward movement. Go removing the paint from the entire wall, but being careful not to drive the spatula and leave marks. Take the time it takes.

    Seal and paint the wall

When finished, you can see how the wall has a much more current style. Now all you have to do is seal the result with a layer of primer, and then paint the surface of the desired color.

To finish with the gotelé is to sew and sing, you just have to dedicate the necessary time. You do not need expensive or complicated tools and materials, but you have to be willing and willing to work. When you see the results, you will not regret the effort made. Your house will be as good as new!

Enviar comentarios

Historial

Guardadas

Comunidad